Esteam Travel Steamer Solutions: Jiffy® Steamer

Clothes, Garment, Fabric & Travel Steamers

"I have recently purchased your Jiffy® Model J-2 steamer. It is more than a fine steamer, for me it is a revelation. Thank you for your fine product."
--Clem Artist
Hackensack, NJ

ESTEAM®

PROBLEM	POSSIBLE CAUSE	SOLUTION
Steamer works poorly or cycles ON and OFF while steaming.	The unit has sediment build-up and needs a thorough cleaning. Possible thermostat trouble.	Use Jiffy® Liquid Cleaner to clean off element. A small brush may be needed to help scrub unit. Replace thermostat on unit.
The red indicator light illuminates but the unit never heats or steams.	Possible blown fusible link wire. Possible blown element.	Replace fusible link wire or replace element in units. This may be done by you, an authorized repair center, or by a Jiffy® Steamer Company technician.
The unit spits water from steam cap.	The unit is being over-filled. The unit needs to be cleaned out inside tank and cap.	Do not over-fill unit above max water mark indicated on side of unit. For best results from your steamer, use Jiffy Liquid Cleaner periodically to remove sediment deposits from your water (every 3 to 4 months) depending on how much the unit is used.

Click here to download PDF version.

PLEASE NOTE: Each of these items serve as simple suggestions and hints when repairing your Jiffy® Steamer. To insure professional service, please send your unit to the plant for authorized personnel to repair the steamer.

Questions?
Call our technical support line
@ 1-800-525-4339
or email us at
jsinfo@jiffysteamer.com

Products
� � �
� � � � �
Model Numbers: � � � � � � �
� � � � � � � �

Information, Service & Support
� � � �
� � �
� �
� �

Our Company
� � � � �

� � � �

Copyright 2008. Jiffy® Steamer Company, LLC